ABUSTEK  make  Indicators  A 1500
The A1500 series of Universal Process Indicators are high performance instruments used for monitoring analogue signals in the vast majority of industrial and laboratory processes. Configuration from the front panel is fast and easy, accepting thermocouples, Pt100 and 4-20mA or voltage signals without any hardware change. The basic version comes with key panel programmable range, selectable decimal point, universal switching power supply, 24Vdc output for field transmitters excitation, ultra bright five digit LED display and 2 relay alarms with 6 function options. 4 to 20mA output for retransmission of measured variable to a recorder or PLC, two extra alarm relays, 1 digital input, RS485 digital communication interface and 10Vdc output for load cell excitation are available as options.

ABUSTEK  make  Controllers  A 4000The ABUS A4000 series Universal Controller is a Microprocessor based Digital Process Controller, which can be applied to high-precision measurement and control of temperature, pressure, discharge, liquid level and humidity etc... A four-digit LCD dual display indicates measured value and set-value for all programming parameters. 

Instrument configuration is achieved from the front panel keyboard, without any hardware change. The user should read this manual thoroughly before using the instrument. It must be handled with care and should be used accordingly for best results.

ABUSTEK  make  Pressure Transmitters  Hart CommunicatorHART Hand Held Communicator is a hand held interface based on HART protocol, which can perform configuration, management, maintenance and adjustment to all HART compatible instruments. It can be easily connected into 4~20mA loop, to achieve the configuration of instrument parameters (upper limit and lower limit etc.),the reading of instrument variables, as well as the diagnosis and maintenance of the instrument. This Communicator can support not only the HART main device (HART multiplexer etc.), but also the peer-to-peer and multi-drop HART communication modes.

ABUSTEK  make  Temperature Instruments  AT - 8701
The AT8701-Thermo-Hygrometer is practical and convenient pocket instrument, which accurately measures and displays temperature and relative humidity simultaneously. It is an invaluable companion for the HVAC technicians, laboratory researchers, food storage operators, librarians, or any professional involved in computer rooms, printing shops, paper, pulp, wood and tobacco plants.

The ABUS LogBox–RHT is an electronic logger for Relative Humidity and Temperature. There are sensors that measure such data and store them in an electronic memory. 
Data can be later viewed and analysed on a PC where they can be opened in tabular and graphical forms. 

The logger is supplied with Logchart-II software, which enables to set up the logger operation mode. It is also used for data visualization. Other parameters such as end of measurements, logging interval, etc., are easily selected through the LogChart-II software. 

Measurements can be exported to and opened in other applications, such as spreadsheet programs.

The ABUS USI Series Universal Smart Isolator being programmable through Handheld Configurator USI-C can be fit into major of industrial applications operating with different signals. It can be ordered to accept up to 2 inputs and provide up to 3 outputs. The input signals can be non-linear input such as resistance temperature detector, thermocouple or linear current or voltage. Signal of one-way, two-way or three-way current or voltage, isolated by transmitting output provides good electric isolation between input, output and power. It can be used as a temperature transmitter,convertor, signal isolator or signal conditioner according to the application.